L54E1100CZ00 CPRM1 | ALSTOM | Low-load trip relay | L54E1100CZ00 CPRM1

The ALSTOM low-load trip relay is an electromagnetic relay with two internal coils:

One is a current-starting coil (TBJ/I), connected in series in the circuit breaker trip circuit. It starts when the protection output relay operates and trip current flows.

The other is a voltage-holding coil (TBJ/U), connected in parallel to the closing circuit via its normally open contact, used for self-holding after tripping.

The relay contact configuration typically consists of four sets: the normally open contact TBJ1 is connected in parallel with the trip output to hold the trip command until the circuit breaker auxiliary contacts open, preventing the output relay contacts from being burned by arcing; the normally open contact TBJ4 closes to prepare for the voltage coil self-holding circuit; two normally closed contacts TBJ2 and TBJ3 are connected in series in the closing coil circuit. When the relay operates, it immediately disconnects the closing circuit, preventing the circuit breaker from closing again, thus achieving anti-pumping.​

“Low load” refers to the extremely low power consumption of the relay coil, minimizing voltage drop and power consumption in the control circuit. According to power industry standards, its current coil voltage drop is less than 5% of the rated voltage of the operating circuit, and the current initiation value is 30% to 50% of the circuit breaker tripping current, ensuring neither false tripping nor failure to trip. The voltage coil operating value is between 50% and 70% of the rated DC voltage, ensuring reliable operation during power fluctuations and preventing false tripping during grounding.

The core technical parameters are as follows:

Rated frequency: 50Hz or 60Hz.

Current initiation value range: 0.07 to 0.12 amperes, coil resistance: approximately 10 ohms, current initiation value not exceeding 50% of the circuit breaker tripping current, ensuring a reliability factor greater than 2.

The current coil voltage drop is less than 5% of the rated DC voltage of the operating circuit; this is the meaning of “low load”—minimal impact on the shunt current of the protection circuit.

The voltage operating value is between 50% and 70% of the rated DC voltage, ensuring reliable operation during DC power supply voltage fluctuations and preventing malfunctions during grounding.

The output contacts are rated at 220V/5A DC. With the normally closed contacts open, they can withstand 1000V DC for 1 minute, and between unconnected conductive parts, they can withstand 2000V DC for 1 minute.

The reset time is no more than 50 milliseconds, and the overtravel time is no more than 30 milliseconds.

The operating temperature range is -10°C to +60°C, the storage and transportation temperature is -25°C to +80°C, the relative humidity is less than 95% and there is no condensation, and the weight is approximately 2.5 kg.

This relay is widely used in ALSTOM MiCOM series protection devices and PACiS substation automation systems, working in conjunction with ALSTOM circuit breaker operating mechanisms. In practical engineering, circuit breakers with voltage levels of 35 kV and above generally employ electrical anti-pumping mechanisms, using this type of relay as the core to form an anti-pumping circuit, creating a double layer of protection together with the circuit breaker’s mechanical anti-pumping mechanism.
Recommended related products:
DSQC639 – ABB Component for industrial automation
AIM0006 2RCA021397A0001L ACS6000 Control Unit ABB for industrial automation
AIM0006 2RCA021397A0001K ACS6000 Control Unit ABB Processing Unit
AIM0006 2RCA021397A0001M ACS6000 Control Unit ABB worldwide delivery
DCS502В0900-41-21P2050_380-415В ACS6000 Control Unit ABB
3BSE028576R1 – ABB Componen Industrial Drive
3BHE021013R0001 – ABB Component best price
3BHB906001446 ACS6000 Control Unit ABB for industrial automation
3BHB009884R0001 ACS6000 Control Unit ABB Interface Module
S-073H 3BHB009884R0002 ACS6000 Control Unit ABB for industrial automation
S-073H 3BHB009884R0004 ACS6000 Control Unit AB user manual
3BHB009884R0013 ACS6000 Control Unit ABB
S-073M 3BHB009884R0013 ACS6000 Control Unit ABB
S-073H 3BHB009884R0204 ACS6000 Control Unit ABB
S-093M 3BHB009885R0014 ACS6000 Control Unit ABB
S-093H 3BHB009885R0002 ACS6000 Control Unit ABB
3BHB009884R0022 ACS6000 Control Unit ABB
S-073H 3BHB009884R0052 ACS6000 Control Unit ABB
S-093H 3BHB009885R0004 ACS6000 Control Unit ABB
S-093S 3BHB009885R0031 ACS6000 Control Unit ABB
More ……

For more industrial automation solutions, visit World PLC.

Explore additional PLC products at Weikun Automation.

🔗 Visit World PLC for more automation products and solutions.

🔗 Explore Weikun Automation for additional industrial control equipment.

{“@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “What is Industrial Automation L54E1100CZ00 CPRM1 ALSTOM Low-load trip relay L54E1100CZ00 CPRM1?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “The Industrial Automation L54E1100CZ00 CPRM1 ALSTOM Low-load trip relay L54E1100CZ00 CPRM1 is a high-quality dcs designed for industrial automation applications. It delivers reliable performance, precision control, and long service life in demanding manufacturing environments.”}}, {“@type”: “Question”, “name”: “What are the main features of Industrial Automation L54E1100CZ00 CPRM1 ALSTOM Low-load trip relay L54E1100CZ00 CPRM1?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Key features include: high-speed processing and real-time response, robust design for harsh industrial environments, easy integration with existing automation systems, advanced diagnostics and monitoring capabilities, and compliance with international industrial standards.”}}, {“@type”: “Question”, “name”: “Where is Industrial Automation L54E1100CZ00 CPRM1 ALSTOM Low-load trip relay L54E1100CZ00 CPRM1 commonly used?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “The Industrial Automation L54E1100CZ00 CPRM1 ALSTOM Low-load trip relay L54E1100CZ00 CPRM1 is widely used in distributed control systems, process automation, oil and gas refineries, chemical plants, and power generation. It is ideal for factories, plants, and facilities requiring dependable automation control.”}}]}